Function tested Draw works

Human Errors. #drillingrig

Seismic Survey (Exploration Activities in the Dessert). #oilandgas

FLUSHING PDC BIT.

Common Drilling Problems and Solution's.

Lubrication and maintenance of the Jin pole (Pulley)..

Draw Works internal lubrication system.

Draw Works (Crank, Chain and locks inspection).

Draw Works internal System (DW chain & locks adjustment).

H2S Gas

Set 13-3/8" casing slip...

Welding conductor pipes.

Drilling with (Foam Fluid) to Prevent losses and down hole problems.

Clamping between Mud Pump pony rod to piston of the liner (After changing of mud pump liners).

Changing mud pump wear plate. (High pressure to low pressure).

Mud tank agitator repairing job.

Repairing Mud tank agitators by Rig Mechanic.

Working with Oil base mud is too hard a job.

Driller safety precautions, Keep team away from the line of the fire. While M/up or B/out TDS.

Dismantled and Moving Rig

Kelly Rig Moving.

Mud leaking from the Hydraulic IBOP ( Upper IBOP), POH UpTo shoe and Changed Hydraulic IBOP.

Lost Circulation briefly and Well explained.#drilling

The Mud Pump lubrication system is working properly and lubricates the inside parts.

Loading Mud Pump and Draw works (Motors).

Mechanic Repaired Hydraulic choke piston. #drillingrig

Happy Eid Mubarak to everyone.

Centrifugal Pump working Principle

after 20" casing job: Heat Up well head for Welding (SOW) prior to N/up 21-1/4-2K BOP stack.

Installation and replacement of Hyperpool protectors, avoid premature screen damage & solid bypass.

Kelly Swivel

N/up Diverter 10" ball valve with 29-1/2" annular element.

Function test of the draw works prior to reeving drill line and Rig up mast, sub Structure.

The SCSSV is controlled by a ¼” stainless steel control line that is attached to the outside tubing.

Dressing and Bevelling the Casing for a Well Head Stub (Casing Head Housing) first section.

RIH Casing and F/up with rubber hose.

Drilling Water water....

Cut conductor pipe with Gas cutter.

Drilling Rig Mast Load Test (Stress test).

Beveling and leveling of 9-5/8" casing after setting casing hanger and final cut.

Final cut of 9-5/8" casing

Dismantled and L/down A-frame with Jin pole of the Rig Mast.

RIH casing with the latest Drilling Rig.

Retrieved MWD tool

POOH up to Surface and Cleaned partially balled up PDC bit with cuttings.

8-1/2" New PDC bit (Smith).

Rough cut 9-5/8" casing to drain out mud from the casing above the Wellhead.

Fill up the 20" casing joint, next joint is ready for M/up to reduce the RIH time and Rig Cost.

Traveling Block Hook (500 Ton Bumco)

H2S Gas is invisible and very dangerous Gas, (10PPM, 15PPM, and 100PPM). The smell is rotten eggs.

Hydraulic jacking system Rig.

20" casing Job

Makeup float shoe with 20" casing joint.

Rig Down Operation with controlled Speed.

RIH Casing

RIH New PDC bit

18 February 2023

Accident On Drilling Rig

MultiLater Well.

Tripping In Hole.