大多数人清洗抽油烟机时，都习惯拆卸清洗，这样既浪费时间，又容易损坏机件。现介绍一种无须拆解机器，而又十分省时省力的清洗方法。
1．取一个塑料瓶（能够用手捏扁的各种饮料瓶都可以），用缝衣针在盖上戳10余个小孔，然后，装入适量的清洁精，再加满温热水摇动均匀。
2．启动抽油烟机，用盛满清洁精的塑料瓶朝待洗部位喷射清洗液，此时可见油污及脏水一道流入储油斗中，随满随倒。
3．瓶内的清洗液用完之后，继续配制，重复清洗。直至流出的脏水变清为止，视积垢程度，一般清洗3遍就可冲洗干净。
4．如扇叶外装有网罩，宜先将网罩拿下以加强洗涤效果。
5．用抹布揩净吸气口周围、机壳表面及灯罩等处。 When cleaning the range hood, most people are used to dismantling and cleaning, which is a waste of time and easy to damage the parts. Now introduce a cleaning method that does not need to disassemble the machine, but also saves time and effort.
1. Take a plastic bottle (all kinds of beverage bottles that can be flattened by hand), use a sewing needle to poke more than 10 small holes in the cover, then add an appropriate amount of detergent, add warm water and shake it evenly .
2. Start the range hood, and spray the cleaning solution with a plastic bottle full of cleaning essence to the part to be washed. At this time, it can be seen that the oil and dirty water flow into the oil storage hopper, and pour it as it is full.
3. After the cleaning solution in the bottle is used up, continue to prepare and repeat the cleaning. Until the outflowing dirty water becomes clear, depending on the degree of fouling, it can be rinsed after 3 times of cleaning.
4. If there is a mesh cover on the outside of the fan blade, it is advisable to remove the mesh cover first to enhance the washing effect.
5. Use a rag to clean around the air intake, the surface of the cabinet and the lampshade.
胶东小王修家电
大多数人清洗抽油烟机时，都习惯拆卸清洗，这样既浪费时间，又容易损坏机件。现介绍一种无须拆解机器，而又十分省时省力的清洗方法。
1．取一个塑料瓶（能够用手捏扁的各种饮料瓶都可以），用缝衣针在盖上戳10余个小孔，然后，装入适量的清洁精，再加满温热水摇动均匀。
2．启动抽油烟机，用盛满清洁精的塑料瓶朝待洗部位喷射清洗液，此时可见油污及脏水一道流入储油斗中，随满随倒。
3．瓶内的清洗液用完之后，继续配制，重复清洗。直至流出的脏水变清为止，视积垢程度，一般清洗3遍就可冲洗干净。
4．如扇叶外装有网罩，宜先将网罩拿下以加强洗涤效果。
5．用抹布揩净吸气口周围、机壳表面及灯罩等处。
When cleaning the range hood, most people are used to dismantling and cleaning, which is a waste of time and easy to damage the parts. Now introduce a cleaning method that does not need to disassemble the machine, but also saves time and effort.
1. Take a plastic bottle (all kinds of beverage bottles that can be flattened by hand), use a sewing needle to poke more than 10 small holes in the cover, then add an appropriate amount of detergent, add warm water and shake it evenly .
2. Start the range hood, and spray the cleaning solution with a plastic bottle full of cleaning essence to the part to be washed. At this time, it can be seen that the oil and dirty water flow into the oil storage hopper, and pour it as it is full.
3. After the cleaning solution in the bottle is used up, continue to prepare and repeat the cleaning. Until the outflowing dirty water becomes clear, depending on the degree of fouling, it can be rinsed after 3 times of cleaning.
4. If there is a mesh cover on the outside of the fan blade, it is advisable to remove the mesh cover first to enhance the washing effect.
5. Use a rag to clean around the air intake, the surface of the cabinet and the lampshade.
3 years ago | [YT] | 4