Here’s some configuration data about the fiberglass joint and test. We can load this stuff with 600lbs or more by bonding with ABS prints. I include these photos on grabcad under “SLEEVE_v1” and next, we can check if this works for smooth tent poles which are ultra cheap. See the blades I recommend for clean cuts on fiberglass
David Malawey
Here’s some configuration data about the fiberglass joint and test. We can load this stuff with 600lbs or more by bonding with ABS prints. I include these photos on grabcad under “SLEEVE_v1” and next, we can check if this works for smooth tent poles which are ultra cheap. See the blades I recommend for clean cuts on fiberglass
3 weeks ago | [YT] | 71