DiscoverBD

Setting up a UTL Taqnia Inverter can be an efficient way to manage your power supply, especially in areas prone to frequent outages. Below is a step-by-step guide to help you set up your inverter system safely and effectively:
Materials Needed:
UTL Taqnia Inverter
Battery (compatible with the inverter)
Battery cables
AC input and output cables
Screwdriver and other basic tools
Safety gear (gloves and eyewear)
Step-by-Step Setup Guide:
Step 1: Choose an Appropriate Location
Ventilation: Ensure the inverter is placed in a well-ventilated area to prevent overheating.
Accessibility: The location should be easily accessible for maintenance purposes.
Surface: Place the inverter on a stable, flat surface away from direct sunlight and moisture.
Step 2: Install the Battery
Positioning: Place the battery close to the inverter to minimize voltage drop.
Connections: Connect the positive terminal of the battery to the positive input on the inverter and the negative terminal to the negative input. Ensure the connections are secure to prevent any power loss or hazards.
Step 3: Connect the Inverter to the Power Supply
AC Input Setup: Connect the AC input cable to the inverter and plug it into your main power supply. This allows the inverter to charge the battery and power your devices when needed.
AC Output Setup: Connect the AC output cable from the inverter to your home’s distribution board or directly to the devices you wish to power.
Step 4: Initial Testing
Power On: Switch on the inverter and check the display panel for any error messages or indicators. The inverter should show that it is charging the battery and ready to supply power.
Test Load: Connect a small load to the inverter to test its functionality. Ensure that the inverter switches to battery power when the main supply is turned off.
Step 5: Regular Maintenance
Inspection: Regularly inspect the inverter and battery connections for any signs of wear or corrosion.
Cleaning: Keep the inverter clean and free from dust to ensure efficient operation.
Battery Care: Check the battery’s electrolyte levels (if applicable) and ensure it is charged properly to extend its lifespan.

1 year ago | [YT] | 0

DiscoverBD

Introducing our versatile Portable Kitchen Scale, designed to meet the diverse needs of any culinary enthusiast. This scale offers a dual capacity option, accommodating both 12kg and 6kg measurements, ensuring precision whether you're measuring larger quantities or smaller ingredients.
Key Features:
Dual Capacity: Seamlessly switch between 12kg and 6kg capacities based on your specific requirements. This flexibility makes it perfect for everything from meal prep to baking.
Battery Powered: Operates with just two AAA batteries, offering convenience and portability. No need to worry about cords or finding a nearby outlet.
Tare Function: Simplify your cooking process with the tare function, which allows you to subtract the weight of containers, ensuring accurate ingredient measurements every time.
Compact and Sleek Design: The scale is lightweight and compact, making it easy to store in any kitchen space or take on the go.
User-Friendly Interface: The clear digital display and intuitive controls make it easy for anyone to use, from novice cooks to professional chefs.

1 year ago | [YT] | 0

DiscoverBD

The Flying Voice WiFi FIP11C, 3SIP Color Display IP Phone is an innovative communication device designed to enhance your telecommunication experience. Here are some key features and benefits of this advanced IP phone:
Vibrant Color Display: The FIP11C features a clear, colorful display, making navigation and operation intuitive and visually appealing. This enhances user interaction and improves accessibility for all users.
WiFi Connectivity: With built-in WiFi capabilities, this IP phone provides the flexibility to connect wirelessly, reducing clutter and allowing for easier installations in various environments.
Multiple SIP Accounts: Supporting up to three SIP accounts, the FIP11C allows for seamless integration with multiple service providers or different departments within an organization, simplifying communication management.
High-Quality Audio: Equipped with HD voice technology, this IP phone ensures crystal-clear audio quality for both speaker and handset, making conversations more natural and effective.
User-Friendly Interface: The intuitive interface of the FIP11C makes it easy for users of all skill levels to operate, minimizing the learning curve and maximizing efficiency.
Advanced Security Protocols: Security is paramount, and this device includes advanced encryption and authentication protocols to protect your communications from unauthorized access.
Customizable Ringtones and Settings: Personalize your phone experience with customizable ringtones and adjustable settings to match your preferences and business requirements.
Integrating the Flying Voice WiFi FIP11C into your communication system not only modernizes your setup but also enhances productivity and connectivity.

1 year ago | [YT] | 0

DiscoverBD

Introducing the Outdoor Microwave Motion Sensor with 12-Watt LED Light, your perfect companion for enhancing outdoor spaces with both functionality and efficiency. Designed for seamless integration into any outdoor environment, this innovative lighting solution combines advanced motion-sensing technology with the energy-saving benefits of LED illumination.
Key Features:
Microwave Motion Sensor: The state-of-the-art microwave motion sensor ensures that the light activates only when motion is detected, providing convenience and security. It is highly sensitive and can detect movement even at a considerable distance, making it ideal for driveways, pathways, and entryways.
12-Watt LED Light: With its powerful 12-watt LED bulb, this light delivers bright, clear illumination while maintaining low energy consumption. Enjoy substantial savings on your electricity bill without compromising on brightness or quality.
Weather-Resistant Design: Built to withstand the elements, this outdoor light features a robust, weather-resistant casing that protects it from rain, wind, and dust. It's perfect for year-round use, ensuring reliable performance in any climate.
Easy Installation: Designed with user-friendliness in mind, the installation process is straightforward. Whether you're a DIY enthusiast or prefer professional assistance, you'll find setup to be hassle-free.
Versatile Use: Perfect for enhancing security and visibility around your home, this motion sensor light is suitable for residential, commercial, and industrial applications. Use it to illuminate gardens, patios, garages, or warehouses.
Adjustable Settings: Customize the light's operation to suit your needs. Adjust the sensitivity of the motion sensor and the duration the light stays on, allowing for personalized control over your outdoor lighting environment.

1 year ago | [YT] | 0

DiscoverBD

The Sonoff WiFi Smart Switch with RF Remote is an innovative home automation device that allows you to control your appliances and lights with ease. This versatile switch can be integrated into your home's WiFi network, enabling you to manage your devices from anywhere using a smartphone or tablet. The accompanying mobile app provides intuitive controls, scheduling options, and even voice command compatibility with platforms like Amazon Alexa and Google Assistant.
One of the standout features of the Sonoff Smart Switch is its RF remote capability. This means that in addition to WiFi control, you can operate your devices using a radio frequency remote, providing an extra layer of convenience. This is especially useful in situations where your WiFi network might be down, or if you prefer a physical remote control option.
Installing the Sonoff WiFi Smart Switch is straightforward, usually involving connecting it to your existing electrical wiring and configuring it through the app. It's a cost-effective solution for anyone looking to modernize their home and improve energy efficiency without the need for a complete system overhaul.

1 year ago | [YT] | 0

DiscoverBD

A 25 amp, 220-volt photo sensor light switch is a device designed to automatically control lighting systems based on the presence of natural light. This type of switch is particularly useful for outdoor lighting, street lights, or any area where lights need to turn on at dusk and off at dawn without manual intervention.
Key Features and Benefits:
Automatic Operation: The photo sensor, also known as a photocell, detects ambient light levels. When natural light diminishes to a certain threshold, the switch activates the connected lights. Conversely, when adequate daylight is detected, the lights are turned off.
Energy Efficiency: By ensuring lights are only on when needed, a photo sensor light switch can significantly reduce energy consumption. This not only lowers electricity bills but also contributes to environmental sustainability.
High Capacity: With a 25 amp rating, this switch can handle substantial electrical loads, making it suitable for a variety of lighting installations, including those with multiple fixtures or high-wattage lamps.
Versatility: Operating at 220 volts, this switch is compatible with many international power standards, making it a versatile option for installations in different regions.
Durability and Safety: Designed for outdoor use, these switches are often weather-resistant and built to withstand various environmental conditions. Additionally, they are equipped with safety features to handle electrical surges.
Installation and Use:
Before installing a 25 amp, 220-volt photo sensor light switch, it's crucial to consider the following:
Professional Installation: Due to the high voltage and current, it's recommended to have these switches installed by a qualified electrician to ensure safety and compliance with local electrical codes.
Positioning: The sensor should be placed in an area where it can accurately measure natural light without obstruction or interference from artificial light sources.
Regular Maintenance: Periodic checks can ensure the photo sensor remains free from dirt or debris that might affect its efficiency.

1 year ago | [YT] | 0

DiscoverBD

The 5.8G Microwave Motion Sensor Switch represents a cutting-edge solution for modern lighting control. Utilizing microwave radar technology, this device is capable of detecting movement through walls, glass, and other non-metallic materials, offering significant advantages over traditional infrared motion sensors.
Key Features:
High Sensitivity and Accuracy: The 5.8 GHz frequency band allows for precise motion detection, making it ideal for environments where accuracy is crucial, such as office buildings, parking lots, and large warehouses.
Wide Detection Range: Unlike infrared sensors that might be limited by obstacles, microwave sensors can cover a larger area, detecting movement over long distances and through obstructions.
Automatic Lighting Control: The sensor activates lighting systems upon detecting motion, ensuring energy efficiency by turning lights off when no movement is detected for a preset period.
Versatile Applications: Perfect for both indoor and outdoor settings, these sensors can be used in residential, commercial, and industrial spaces, providing convenience and security.
Adjustable Settings: Many models offer customizable settings for sensitivity, range, and delay time, allowing users to tailor the sensor's performance to their specific needs.
Energy Efficiency: By ensuring lights are only on when needed, these sensors contribute to reduced energy consumption and lower utility bills.
Benefits:
Enhanced Security: By detecting unexpected movement, these sensors can deter potential intruders and enhance security measures.
Convenience: They provide hands-free operation, automatically turning lights on and off without the need for manual switches.
Cost Savings: Reduced electricity usage leads to long-term savings, making them a cost-effective solution for lighting control.
Installation Considerations:
When installing a 5.8G Microwave Motion Sensor Switch, it's important to consider the placement to maximize coverage and functionality. Professional installation might be recommended for optimal performance, especially in complex environments.
In summary, the 5.8G Microwave Motion Sensor Switch is an intelligent choice for those seeking efficient and reliable motion detection technology. With its advanced features and benefits, it stands as a testament to the innovations in modern lighting solutions.

1 year ago | [YT] | 0

DiscoverBD

A PIR (Passive Infrared) motion sensor can be a valuable tool in reducing your electricity bill by optimizing the use of lighting and other electrical devices. These sensors detect infrared radiation emitted by moving objects, particularly humans, within their range. Here's how they can contribute to energy savings:
Automatic Lighting Control: PIR sensors can automate the turning on and off of lights based on movement detection. This means lights are only on when needed, significantly reducing the time they are unnecessarily left on, thus saving energy.
Improved Efficiency in Common Areas: In places like hallways, restrooms, and outdoor spaces, PIR sensors ensure that lights are activated only when someone is present. This is particularly useful in commercial and residential buildings where lights might be left on for extended periods.
Enhanced Security: By automatically turning on lights when motion is detected, PIR sensors can discourage intruders, enhancing security while reducing the need for continuous lighting.
Energy Management in HVAC Systems: Some advanced systems use PIR sensors to adjust heating, ventilation, and air conditioning (HVAC) based on occupancy, ensuring that energy is not wasted on cooling or heating unoccupied spaces.
Cost-Effective and Easy to Install: PIR sensors are generally affordable and can be easily integrated into existing lighting and electrical systems, providing a quick return on investment through energy savings.
By incorporating PIR motion sensors into your home or business, you not only contribute to environmental sustainability by reducing energy consumption but also enjoy the financial benefits of a lower electricity bill.

1 year ago | [YT] | 0

DiscoverBD

উচ্চ মানের প্লাস্টিক উপাদান
উচ্চ মানের ইনফ্রারেড সেন্সর ও আইসি দ্বারা তৈরি
ইনফ্রারেড প্রযুক্তি স্বয়ংক্রিয়ভাবে সুইচ নিয়ন্ত্রণ ছাড়াই মানুষের সেন্সিং দ্বারা বাতি চালু হবে এবং নির্দিষ্ট সময় পর বন্ধ হয়ে যায় (নির্দিষ্ট সময় আপনি নিজেই সেট করে নিতে পারবেন ১০ সেকেন্ড থেকে ১০ মিনিট
পর্যন্ত আনুমানিক)
সাইজ আনুমানিক: ৮৫X৮৩x৩২ মিঃমি
রঙ: সাদা
ওয়ার্কিং ভোল্টেজ: এসি ১৭০-২৫০ ভোল্ট
স্ট্যান্ডবাই খরচ: আনুমানিক ০.১ ওয়াট এর কম
লোড : 3-50 ওয়াট E27 টাইপ বা প্যাচের বাল্ব (যেকোনো ৩ থেকে ৫০ ওয়াট এর এলইডি বা সিএফএল এনার্জি সেভিং বাল্ব এর জন্য)
সংবেদনশীল পরিসীমা: 3-8 মিটার 120 ডিগ্রী এঙ্গেল
কালো তে দিলে শুধু রাতের বেলা বাতি অন হবে )
ইনস্টল বা প্রতিস্থাপন সহজ।
স্বয়ংক্রিয় আলো নিয়ন্ত্রণ আপনার বিদ্যুৎ শক্তির সাশ্রয় করবে যার ফলে আপনার বিদ্যুৎ বিল কমবে ।
এটির ব্যবহার: সিঁড়ি, বাথরুম, গ্যারেজ লাইট, দোকান ঘর, গুদাম,
কি কি আছে ঃ একটি অটোমেটিক হোল্ডার , ২ টি স্কু , ২ টি স্কু ক্যাপ, ২ টি রয়্যাল প্লাগ দেয়ালে লাগানোর জন্য, একটি কেব্‌ল কানেক্টর
সুবিধা – সুইচ খারাপ হবার ঝামেলা নাই, ৮০% সময় বিদ্যুৎ সাশ্রয় হয় কারণ সারাক্ষণ ধরে বাতি জ্বলে না । বাতি বেশিদিন ধরে টেকে কারণ বেশির ভাগ সময় অফ থাকে ।

ছোট ফ্লাট অথবা স্টার স্কুরু ড্রাইভার দিয়ে হালকা ভাবে ডানে অথবা বামে ঘুরান,( +) দিন ও রাত উভয়,( -) শুধু মাত্র রাতে কার্যকর ।

2 years ago | [YT] | 0

DiscoverBD

D-link DSL-2750U Setup @discoverbd2008

6 years ago | [YT] | 0