People have asked if I could make the files available for the 3D printed stepper motor end caps I made in my most recent video, so here they are. There is a left and a right with the cable exit on different sides. The threaded hole is M20 and will fit a standard cable gland. You will need 4x M3 bolt 30mm long to attach to the back of the motor (You'll probably have to shorten the motor bolts by about 5mm).
These files can be downloaded from Patreon for free, no joining as a member or payment required (but, hey, if you want to show your appreciation...😉)
AndysMachines
AndysMachines
People have asked if I could make the files available for the 3D printed stepper motor end caps I made in my most recent video, so here they are. There is a left and a right with the cable exit on different sides. The threaded hole is M20 and will fit a standard cable gland. You will need 4x M3 bolt 30mm long to attach to the back of the motor (You'll probably have to shorten the motor bolts by about 5mm).
These files can be downloaded from Patreon for free, no joining as a member or payment required (but, hey, if you want to show your appreciation...😉)
www.patreon.com/AndysMachines
1 year ago (edited) | [YT] | 56
View 3 replies
AndysMachines
Fieldhouse Engineering Ltd have asked me to share the joy and introduce their next challenge: ‘Toughest Tower’.
There is £1000 to be won for the strongest towers submitted!
For the general discussion and all the rules of this event please head over to their public Facebook page: www.facebook.com/groups/fieldhousechallenges or website: feng-ltd.com/challenges/
Good Luck!
1 year ago (edited) | [YT] | 21
View 0 replies