SUNXIN Metal Materials

Today’s photos feature 0.18 mm titanium wire from our factory.
That’s a diameter of 180 micrometres. For fine wire, diameter is only part of material selection. The grade, delivery condition, dimensional tolerance and processing requirements also need to be considered.
A close-up of the product and another glimpse into everyday materials at Sunxin.
钛材产品 / Titanium products：
www.sunxinalloy.com/titanium.html
官网 / Website：
www.sunxinalloy.com/
#TitaniumWire #FineWire #Titanium #Metalworking #MaterialsScience

Skip the Carousel

1 2 3 4

2 days ago |[YT] | 0

SUNXIN Metal Materials

316LVM Plate Ready to Ship | Checking Marking and Packing Before Sealing
Today we are showing a batch of 316LVM medical stainless steel plate that has been packed and is ready for shipment.
The wooden case remains open for final verification of:
Material grade and marking
Plate quantity and arrangement
Surface protection and packing condition
Shipping documents and order information
IT also shows the 316LVM marking on the plate. Clear identification helps the customer verify the grade upon arrival and supports material traceability.
After the final check, the wooden case will be sealed and dispatched.
316LVM：
www.sunxinalloy.com/AISI316LVM-1.4441-UNSS31673-X2…
Sunxin Alloy：
www.sunxinalloy.com/

Skip the Carousel

1 2

2 weeks ago |[YT] | 0

SUNXIN Metal Materials

Shipping 316LVM coil wire today (UNS S31673 / 1.4441 / X2CrNiMo18-14-3).
Coil wire is supplied in continuous lengths on a spool, ready for automatic feeding, secondary drawing or continuous forming — a common starting point for springs, mesh and finer-diameter wire. 316LVM is a vacuum-melted medical stainless — low carbon, high purity — meeting ASTM F138 and ISO 5832-1, widely used in medical implants and precision parts.
The key metrics for coil wire: surface quality, diameter uniformity and clean spooling.
316LVM: www.sunxinalloy.com/AISI316LVM-1.4441-UNSS31673-X2…
Website: www.sunxinalloy.com/

3 weeks ago |[YT] | 0

SUNXIN Metal Materials

316LVM Medical Stainless Steel Plate Off the Line | Why It's Used for Implants
A batch of 316LVM medical stainless steel plate (UNS S31673 / 1.4441 / X2CrNiMo18-14-3) fresh off the line today.
"316L" is a low-carbon austenitic stainless; "VM" stands for vacuum melted — vacuum metallurgy sharply lowers inclusions and raises purity and batch consistency, giving better fatigue life and corrosion resistance. It meets ASTM F138/F139 and ISO 5832-1 implant standards and is widely used for bone plates, screws and spinal fixation, plus surgical instruments.
Brushed finish, plate in stock — an ideal raw material for medical implant parts.
316LVM: www.sunxinalloy.com/AISI316LVM-1.4441-UNSS31673-X2…
Website: www.sunxinalloy.com/
#316LVM #StainlessSteel #MedicalGrade #Implants #ASTMF138 #Biomaterials #Shorts #SurgicalSteel #MedicalDevices #Metallurgy

1 month ago |[YT] | 0

SUNXIN Metal Materials

Inside the factory | The people behind the material
We often talk about titanium's properties and standards; today, a different angle — our colleagues on the floor.
Here, workers align and straighten bundles of titanium bars and move them together with the overhead crane; nearby sit sponge-titanium raw material and coils of titanium wire. These everyday motions rest on years of experience, focus and teamwork — straightness, neat sorting and safe handling all come down to people.
We produce Ti-6Al-4V titanium bars (Grade 5 and ELI Grade 23) for medical and precision applications. What the datasheet won't tell you: consistent quality comes from this frontline team at the machines every day. This post is a small tribute to them.
Ti-6Al-4V Grade 5: www.sunxinalloy.com/ti-6al-4v-grade-5-titanium-uns…
ELI Grade 23: www.sunxinalloy.com/ti-6al-4v-eli-titanium-uns-r56…
Website: www.sunxinalloy.com/
#FactoryLife #Titanium #Ti6Al4V #Grade5 #Grade23 #PeopleBehindThebrand #Manufacturing #TeamWork #TitaniumBar #Craftsmanship #WorkshopLife

Skip the Carousel

1 2

1 month ago |[YT] | 0

SUNXIN Metal Materials

How Small-Diameter Titanium Bars Are Made | Straightening & Tolerance | Ti-6Al-4V
A look at how small-diameter titanium bars are processed. Each thin rod runs through roller straighteners, with tight control over straightness, diameter tolerance (h6–h9) and surface finish — ready for downstream CNC and precision parts.
Today we're running two common Ti-6Al-4V grades:
· Grade 5 (TC4): the most widely used α+β titanium alloy — high strength, corrosion-resistant, low density.
· ELI Grade 23: the extra-low-interstitial version with higher toughness and purity, common in medical implants.
Small-diameter bars available from Ø1.0mm, full size range.
Grade 5: www.sunxinalloy.com/ti-6al-4v-grade-5-titanium-uns…
ELI Grade 23: www.sunxinalloy.com/ti-6al-4v-eli-titanium-uns-r56…
Website: www.sunxinalloy.com/
#Titanium #Ti6Al4V #Grade5 #Grade23 #TitaniumBar #TitaniumRod #PrecisionMachining #Shorts #MedicalMaterials #Metallurgy

Skip the Carousel

1 2 3

2 months ago |[YT] | 0

SUNXIN Metal Materials

Orthopedic Instruments Our Client Made From Our Materials | Steel & Titanium Ti-6Al-4V
This orthopedic internal-fixation instrument set was made by our partner client using materials we supplied — sharing it here.
The set includes: star drivers (T2.7–T4.3), hex drivers (SW1.5–SW5.0), graduated drills and taps, T-handles, a mallet and a rongeur.
The instruments are built from our surgical stainless steel (martensitic / precipitation-hardening grades — hard, wear-resistant, high-torque, repeatedly sterilizable); the matching screws and plates use our Ti-6Al-4V titanium (high strength, low density, corrosion-resistant, highly biocompatible).
From raw material we ship to a finished product in the client's hands — steel does the installing, titanium stays in the body.
Stainless steel: www.sunxinalloy.com/stainless-steel.html
Ti-6Al-4V Grade 5: www.sunxinalloy.com/ti-6al-4v-grade-5-titanium-uns…
Website: www.sunxinalloy.com/
#Orthopedics #SurgicalInstruments #Titanium #Ti6Al4V #Grade5 #StainlessSteel #MedicalDevices #Shorts #MedTech #Implants

Skip the Carousel

1 2 3 4

2 months ago |[YT] | 1

SUNXIN Metal Materials

Customer Feedback | Titanium Alloy Used for Orthopedic Locking Plate Manufacturing
it shows a customer application case of a T-shaped Locking Compression Plate manufactured with Sunxin titanium alloy material.
Sunxin supplies:
Ti-6Al-4V Grade 5 Titanium
Ti-6Al-4V ELI Grade 23 Titanium
Medical Stainless Steel
Cobalt Alloy
for orthopedic implant manufacturers and precision industries.
Grade 5 Titanium:
www.sunxinalloy.com/ti-6al-4v-grade-5-titanium-uns…

Grade 23 Titanium:
www.sunxinalloy.com/ti-6al-4v-eli-titanium-uns-r56…
Website:
www.sunxinalloy.com/
#TitaniumAlloy
#OrthopedicImplant
#MedicalDevice
#ImplantMaterials
#TitaniumSupplier
#MedicalManufacturing
#EngineeringMaterials
#SunxinAlloy

Skip the Carousel

1 2 3 4

2 months ago |[YT] | 1

SUNXIN Metal Materials

Ti-6Al-4V Grade 5 Titanium Shipment | From Material Preparation to Export Packaging
It shows the shipment process of Ti-6Al-4V Grade 5 titanium materials from Sunxin factory.

Products include:

Titanium plates;
Titanium bars;
Customized material sizes.

Our process includes:

Material preparation → Quality confirmation → Protective packaging → Export delivery

Providing reliable high-performance alloy materials for global customers.

Product:
www.sunxinalloy.com/ti-6al-4v-grade-5-titanium-uns…

Website:
www.sunxinalloy.com/

Skip the Carousel

1 2 3 4 5

2 months ago |[YT] | 0

SUNXIN Metal Materials

The Steel Behind Joint Surgery — Precision Instruments Made With Our Material ​
Ever wondered what the tools used in a joint replacement are actually made of? A partner of ours sent over these precision orthopedic surgical instruments — machined from stainless steel we supply.
In this video we break them down: cutting/sizing guides that direct the saw and drill, an adjustable alignment device, a depth gauge, and a driver shaft. Each has to hold tight tolerances through hundreds of sterilization cycles — which is exactly why the steel matters.
It's one thing to ship raw metal; it's another to see it become instruments a surgeon depends on.
Materials used:
420A stainless steel: www.sunxinalloy.com/420a-stainless-steel-uns-s4200…
17-4PH (AISI 630) stainless steel: www.sunxinalloy.com/17-4ph-aisi-630-uns-s17400.htm…
www.sunxinalloy.com/
#SurgicalInstruments #OrthopedicSurgery #StainlessSteel #JointReplacement #MedicalMaterials #HowItsMade #Manufacturing #MedicalDevices #Precision #Engineering

Skip the Carousel

1 2 3 4

2 months ago |[YT] | 1