WasherTech

My newest acquisition, a indesit IWC71453. I got this machine for £40 and it’s only done three cycles in its life apparently. Came from a really nice house, people were moving out and needed this gone asap. The reason I got this will hopefully be explained at a later date as I have an idea for this machine, that’s why I got it

Skip the Carousel

1 2 3 4 5

3 weeks ago | [YT] | 142

WasherTech

Beko WX94344OW - Broken, apparently drum doesn’t turn/ soon as it fills up drains out immediately (fixed now)

Skip the Carousel

1 2 3 4 5

1 month ago | [YT] | 106

WasherTech

New machine time, this is a John Lewis JLWM1412. Didn’t pay much for it, it’s broken but in mint condition. The issue with it is that the machine will start a cycle like normal but then jump down to 1 minute and go straight to end. I’ve played around with it and found it to be a heater error (e66) so should be a simple fix

Skip the Carousel

1 2 3 4

1 month ago | [YT] | 87

WasherTech

Today I picked up a hoover optima OPH716 washing machine. Paid a bit more for this as it’s working and I’ve always wanted to try one of these.. have to say it’s quite the beast when it’s on spin it sounds crazy 😭😭 it was made in 2010 I’ve been told so should hopefully be alright even though it has the old front. Was told 2008 was when they had exploded. It was always used on daily 59 I was told so should be ok I think

Skip the Carousel

1 2 3 4 5

2 months ago | [YT] | 81

WasherTech

Another new machine, this is a hoover link 8kg 1600 spin HL1682D3 washing machine I got. Told it had a mind of its own and would constantly beep and change the settings. Since I’ve had it, it’s been fine and hasn’t done that. The only other issue it has is that it’s extremely rusty on one side

Skip the Carousel

1 2 3 4

2 months ago (edited) | [YT] | 76

WasherTech

Another Samsung has found me 🤣 this one’s probably got a weirder fault than my one that now works… it’s a Samsung WW90J5456FX although it’s got the same board as mine on it.. it has been changed but I do have the original board as you can see in the last photo. So the story with this machine is that it apparently didn’t know when to stop filling and they had changed the valves, pressure switch and pcb and it still did it I was told. So anyways I’ve just tested it and the pcb that’s identical to my one doesn’t lock the door and the one that it original should have does lock the door and what it does soon as it’s locked the door, it turns the valves on for water 😭 but acts like it doesn’t and still does the spin as normal. The machines pumps both work though this time. I was also told that he think it has a bit of a leak inside the machine and I can confirm there could be as there was water inside of it. The door seal must of been changed too as it’s not on straight. I was gonna use this front panel on this one for mine but yk what it’s in worse condition than mine so no thanks. Think the issue could be ntc related if it’s not the pcb but who knows. I defo want the door for mine I don’t like the chrome one it has

Skip the Carousel

1 2 3 4 5

2 months ago | [YT] | 98

WasherTech

What a unit, this is an LG F1495KD6 washing machine. It’s broken unfortunately it keeps tripping the power so will look into it. From what I can tell so far is that it does turn on

Skip the Carousel

1 2 3 4

2 months ago | [YT] | 121

WasherTech

HAPPY NEW YEAR!! A bit of a late post but thought I’d make one still anyways. Hope everyone’s 2024 was good and wish everyone all the best in 2025 and that all your New Year’s resolutions go the way you want. 2024 for me was a alright year personally had a lot of down moments in my personal life at times and have been very busy with my life but hopefully this year I’ll be able to continue to focus on my channel and bring content that everyone enjoys. The 5 photos below are some of my most favourite moments from 2024! All the best this year and thank you for watching my channel and sticking by through thick and thin let’s hope this year is a good one - Brad
PS: My Samsung is getting fixed I have a new pcb on the way (not my mums one that one is still fine and working)

Skip the Carousel

1 2 3 4 5

4 months ago (edited) | [YT] | 75

WasherTech

MERRY CHRISTMAS!! Hope everyone has a good day! I got this on the 23rd of December so only a few days ago. It’s a Samsung EcoBubble WF80F5E5U4X which is broken. The issue is that the pump doesn’t turn on but it can do everything correctly and not get stuck. I checked all the wiring for continuity to see if it was all fine and it was. And whenever the pump came on I could hear a relay clicking for it but no pump came on. The pump was in fact working too. Then I tried it on a wash cycle and the wash valve wouldn’t come on even though it works fine. I did manage to remove the pcb out of the jelly stuff it was in but looked all fine but now it doesn’t want to lock the door so will probably parts as I cannot destroy it due to it being an inverter machine. Shame as it’s in brilliant condition, so in that case there won’t be any videos of it most likely (apart from one or two basic videos) UPDATE: (28th of December) IT WILL BE NOW FIXED AS SOURCED CHEAP PCB FOR IT

Skip the Carousel

1 2 3

4 months ago (edited) | [YT] | 57

WasherTech

Latest machine that I got today. Paid £25 for it, it’s broken and only a year old!! It’s a candy smart CS1482DE/1-80. So the issue with it is that it shows E01. Long story short then whenever I started the machine it would show the error and then lock and then I played around with the cycles and then it locked and showed E01. So I ended up changing door lock but did nothing, looked at the board and looked fine so thought I would change ntc as I know these can be a bit funny with how they show their errors. It errored once but then didn’t error when I put it on spin only no spin and went through to end so I started to think hmm motor issue? But then I put it on a spin and it worked. Then I left it for half an hour and the error came back but after fighting with it to go again it started again.. And then I left it for ANOTHER HALF HOUR and it appears to be ok so think it’s just very temperamental? The dates on the inside say it was made around feb march or April of 2023

Skip the Carousel

1 2 3 4 5

4 months ago | [YT] | 74