Gxcom Poe Switch

How to detect and troubleshoot PoE failures？

In a basic PoE power supply system, the main components are the power supply equipment (PSE), the powered device (PD) and the PoE cable. When something goes wrong with PoE, most of the time, the error symptoms can simply manifest as the PoE switch not providing power and the powered device will stop working. There may be many factors causing the failure, including hardware device factors and software factors. How to accurately identify the source of PoE errors and minimize PoE troubleshooting time? This article details three common PoE failures and how to troubleshoot Power over Ethernet.


PoE Error 1: PoE switch does not provide power
PoE PD failure to start is one of the most common errors in PoE failure, usually caused by PoE component problems or incorrect configuration commands. Please follow these steps to resolve the issue:


Step 1: Check PoE IEEE standards and power supply modes of PSE and PD
If there are no quality issues with your PoE network switch and PD, you need to confirm whether both the PSE and PD comply with the PoE IEEE standard. Note that non-standard PoE switches, also known as passive PoE switches, always provide power over the Ethernet line at a specific voltage, regardless of whether the end device supports PoE or not. If not adequately prepared, passive PoE switches may burn out end devices. In addition, the power supply mode of PSE and PD is also a factor that may cause PoE failure. There are three PoE modes: Alternate A, Alternate B, and 4-pair transmission. If the PD only supports PoE mode B power supply and the PoE switch is based on Alternative A, the PD and PoE switch cannot work together. Please be sure to confirm the power supply mode of PSE and PD with the supplier.


Step 2: Check PoE cabling
Mismatched Ethernet cables and PoE ports can cause network failures. Additionally, PoE failures may occur if the cable has a hardware fault or does not meet the necessary standards. Therefore, it is highly recommended to ensure that the Ethernet cable supports PoE and is available before connecting a powered device.


Step 3: Check whether the PoE power supply is sufficient
The PSE device interface can automatically detect the PD when it is connected. If the power is insufficient, the PD will not be able to provide power. Ensure that the power used to run the PD does not exceed the power budget of the PoE network switch. If the PSE detects that the PD's power level is within its capacity, it will power the PD.


Step 4: Check PoE power management configuration
Check whether the switch interface is configured with automatic PoE power management configuration. If not, you will need to manually power the PD connected to the PoE network switch interface.



PoE Error 2: PoE PD intermittently loses power or reloads
What if a working PD stops powering or reloads intermittently? If there is a power outage during reinstallation or operation, it may be caused by insufficient power supply or poor quality of the PoE cable.


Step 1: Check if the PoE power supply is sufficient
When the PSE output power is insufficient to satisfy all PDs operating at full power consumption, the PoE PDs may intermittently power down or reload, causing the PoE switch to lose power. Take a network camera as an example. When testing all extended functions (such as pan, tilt, zoom, heater, wipers, etc.), the PD may consume more power during testing than required for normal operation. Without additional power, the camera may get stuck in a continuous boot cycle. To troubleshoot this PoE failure, measure how much power the network camera requires during boot and use the correct PSE to provide sufficient power.


Step 2: Check PoE cabling
If the Ethernet cable used in the PoE link is longer than 100 meters, or if there is a power outage due to the material and resistance of the cable itself, the PD will not receive enough power, causing problems such as network failure or latency. If the cable is not qualified, it will also cause PoE failure.


PoE Error 3: Some PDs are receiving power while other PDs on the same PSE are not
If a certain number of PDs can be powered on, but others are still powered off, you should check by following these tips:


Step 1: Check if other ports have available PDs
Check whether some PSE ports are faulty. Disconnect the PoE cable between the Ethernet switch port and the PD that cannot be powered. If the PD can still supply power normally after being connected to other PoE ports, it proves that some ports are faulty. Use the configure command to verify that the port is down or incorrectly disabled. If yes, please execute the command to enable the PoE function.


Step 2: Check PoE power
If a new PD is added to a PSE port and the PoE switch power budget is exhausted, the PD will not power on. Ensure that the remaining PoE power of the PSE is equal to or greater than the maximum output power required by the connected PD. Additionally, limit the current flow to each port to safe levels and use additional PSE devices when necessary.



PoE Error 4: PoE camera not receiving power
If your camera won't power on when using a PoE switch or PoE injector, you can follow the tips below to resolve the issue.


Step 1: Check if the camera is compatible with the PoE switch/PoE injector
Please check what type of PoE switch or PoE injector you can use with your camera. Make sure the PoE switch or PoE injector has the correct specifications.


Step 2: Check that the camera is fully connected to the PoE switch/PoE injector
Please check the PoE port lights on the PoE switch/PoE injector. If the light doesn't come on, you can plug the camera into a different port and try using another Ethernet cable. Make sure the switch's PoE ports are not rusty or damaged. This can be proven by replacing other good PoE ports.


Step 3: Check whether the camera PoE module is powered on
If the PoE module fails to provide power, please use a DC adapter with the correct output voltage to power the camera. Make sure the DC/AC adapter is available. Generally speaking, the adapter has an indicator light that can be used to determine whether power is being supplied. Some network cameras with DC/AC power interfaces can support DC12V/2A and AC 24V/3A power supply. Please ensure that the adapter specifications are consistent with the camera.

4 months ago | [YT] | 0

Gxcom Poe Switch

1. Gigabit 4 port Standard PoE switch with 2*1G RJ45 uplink port , complies to IEEE802.3AF/AT, unmanaged 48v poe network switch
2. Passive Gigabit 4 port 24V PoE switch with 2*1G RJ45 uplink port , unmanaged passive poe network switch

Please feel free to contact and let us know your requirements so we can recommend the suitable devices for you.
#networking #ethernetswitch #cctv #network #telecommunications #cisco #network switches #ethernet switches #poeswitch #poe

Website: www.fiberok.com
Email: sales@fiberok.com

Skip the Carousel

1 2

5 months ago | [YT] | 0

Gxcom Poe Switch

Compact and stable Gigabit 8 port PoE Switch from 13 years Manufacturer , provide smart solution for your networking.
More PoE Network switch options and free network solutions , welcome to contact us.

6 months ago | [YT] | 0

Gxcom Poe Switch

Advantages of the 90W high power PoE Switch



1. Enhanced Power Delivery Capabilities
The primary advantage of a 90W PoE switch is its ability to deliver significantly higher power compared to traditional PoE standards like IEEE 802.3af (15.4W) and IEEE 802.3at (30W). With a maximum output of 90 watts, these switches can power devices that require substantial energy, such as high-definition IP cameras, PTZ (Pan-Tilt-Zoom) cameras, wireless access points, and even some IoT devices. This capability eliminates the need for additional power supplies, simplifying installation and reducing costs.



2. Support for Advanced Devices
Modern surveillance systems, for instance, often rely on high-resolution cameras that consume more power than their predecessors. A 90W PoE switch ensures that these cameras operate at peak performance without the need for external power sources. Similarly, advanced wireless access points that support multiple spatial streams and higher data rates also benefit from the increased power delivery of 90W PoE switches.



3. Improved Network Efficiency
By consolidating power and data transmission over a single Ethernet cable, 90W PoE switches reduce the number of cables required in a network setup. This not only simplifies cable management but also minimizes clutter and potential points of failure. Additionally, the centralized power management offered by these switches can lead to more efficient use of power resources, potentially lowering overall operational costs.


4. Scalability and Flexibility
Organizations looking to expand their network infrastructure can do so more easily with a 90W PoE switch. The ability to power multiple high-power devices from a single switch means that additional devices can be added without the need for extensive cabling or electrical infrastructure modifications. This flexibility is particularly valuable in dynamic environments where the network needs to adapt to changing requirements.



5. Enhanced Reliability and Redundancy
Many 90W PoE switches come with built-in features such as redundant power supplies and advanced power management capabilities. These features ensure that the network remains operational even in the event of a power failure or other issues. The reliability provided by these switches is crucial for mission-critical applications where downtime is unacceptable.



6. Future-Proofing
As technology advances, the power requirements of network devices are likely to increase. Investing in a 90W PoE switch now can future-proof your network infrastructure, ensuring that it can support new devices and technologies as they emerge. This proactive approach can save organizations from the need for costly upgrades or replacements in the future.



Conclusion
In summary, the 90W PoE switch is an indispensable component for modern network deployments, offering enhanced power delivery capabilities, support for advanced devices, improved network efficiency, scalability, reliability, and future-proofing. By understanding these benefits, businesses and organizations can make informed decisions about their network infrastructure investments, ensuring that they are well-equipped to meet the demands of today's and tomorrow's technological landscape.


This professional overview should help you attract customers by highlighting the key advantages of 90W PoE switches. If you need further information or specific details, feel free to ask!

7 months ago | [YT] | 0

Gxcom Poe Switch

Good news: Free Customization of PoE Ethernet Switches

Gxcom Technology Co., LTD , we are offering FREE OEM services and zero customization fees on network switch products depending on customers' situation.







What We Offer — 100% Free Customization
We believe customization should be accessible, not expensive. That’s why we offer:

✅ No OEM setup fees
✅ No customization fees
✅ Low or no minimum order quantity (MOQ)
✅ Free technical consulting & design validation
✅ Fast sample prototyping and testing




Custom Doesn’t Mean Complicated
We’ve streamlined the customization process from start to finish:

Consultation – Tell us your needs, specs, and branding vision.
Design Proposal – We’ll send you a product plan and mockups.
Sample Production – We create working samples for testing and approval.
Mass Production – After approval, we move quickly to manufacture and deliver.




Contact us today to learn how you can launch or expand your network switch product line — with zero customization cost. Contact at: sales@fiberok.com

7 months ago | [YT] | 1

Gxcom Poe Switch

IES2000-8P-2FM is an industrial grade PoE multi-function network switch independently developed by GXCOM. 1-8 ports support 802.3af/at PoE standard and supply Max. 30W per port. As the most compatible 8 full Gigabit RJ45 ports and 2 separate Gigabit SFP (Mini GBIC) , Provide a comprehensive security protection system. The switch is with rich layer 2 management via Web interface and CLI both including remote PoE management. The durable metal housing is with Din-rail to install in any industrial environment.



Port performance

● Provide 8*10/100/1000M RJ45 PoE adaptive ports, all of which can realize line speed forwarding.
● Provide 2 Gigabit SFP photoelectric multiplexing uplink ports for high-speed uplink transmission.
● It supports the combination of multiple types of ports to facilitate users' flexible networking and meet the networking requirements of various scenarios;
● Each port supports MDI / mdix automatic flip and duplex / rate self negotiation.
● Support IEEE 802.3x full duplex flow control and back-pressure half duplex flow control.

PoE Power Supply Function

● It meets IEEE 802.3af/at power supply standard.
● Ports 1-8 support up to 30W output
● Automatic identification of PoE equipment for power supply without damage to non PoE equipment.

Skip the Carousel

1 2 3 4

9 months ago | [YT] | 0

Gxcom Poe Switch

Debunk some myths about Ethernet switches

Myths 1 : Switches Slow Down Network Speed?
Some people wonder switches can slow down network performance. Is that a truth or misconception?

Switches are designed to improve network speed by efficiently managing data traffic.They reduce collisions by creating micro-segments, enabling devices to communicate without interference. This means they can actually enhance speed, particularly in busy networks with multiple devices exchanging data simultaneously.



How Switches Actually Enhance Network Efficiency
The efficiency of a switch is often underestimated. By only sending data to the intended recipient rather than broadcasting it to all connected devices, switches reduce unnecessary traffic.

Furthermore, modern switches support features like link aggregation, which can significantly increase throughput by combining multiple network connections. They also enable Quality of Service (QoS) settings, allowing prioritization of critical traffic for applications like Voice over IP (VoIP) or video conferencing.




Myths 2: More Expensive Switches are Always Better?
It’s a common belief that higher-priced switches automatically guarantee better performance. However, the reality is more nuanced.

While higher-cost switches often come with advanced features and better build quality, the best choice depends on specific network needs rather than price alone. A more affordable switch may function perfectly well in a small network setup.



Factors to Consider When Choosing a Switch
When selecting a switch, consider the following factors:

1. Network size: Evaluate the number of devices to determine the necessary number of ports.
2. Network type: Assess if you need managed features or if unmanaged ones would suffice.
3. Future scalability: Choose switches that can accommodate network growth in the future.

By considering these aspects, you can make a more informed decision that balances cost, performance, and future-proofing needs.

Myths 3: Switches are Difficult to Install and Manage?
Many believe that switches are complex devices requiring expert knowledge to install and manage. While this might be true for certain managed switches, many options are user-friendly.

Unmanaged switches, for example, are designed for simplicity, requiring no configuration. Users can simply connect devices, and the switch will handle the rest automatically.



Simplifying Switch Installation and Management
Even managed switches have improved significantly in terms of usability. Many manufacturers offer web-based interfaces or mobile apps that simplify setup and management.

With these advancements, organizations can now implement network solutions without needing extensive IT expertise. Investing time in understanding a switch’s features can yield immense benefits, making management tasks straightforward and efficient.



Conclusion: Embracing the Switches for Better Networking

By debunking these common myths, businesses and individuals can make smarter decisions when it comes to networking. Acknowledging the diversity of switches, recognizing their unique functions, and mastering their installation will enhance overall network performance and management.

The truth about switches is that when chosen wisely, they can profoundly impact the efficiency and reliability of your network.

9 months ago | [YT] | 0

Gxcom Poe Switch

How much power does poe switch use?

The power consumption of a Power over Ethernet (PoE) switch can vary based on several factors, including the number of ports, the type of PoE standard it supports, and the load from connected devices. Here are general guidelines for understanding PoE switch power consumption: Typical Power Consumption Ranges
Idle Power Consumption:
Most PoE switches consume between 10 to 50 watts when idle, depending on the model and features.


Active Power Consumption:
PoE (IEEE 802.3af): Up to 15.4 watts per port. A fully loaded 8-port switch could consume about 60 to 120 watts.
PoE+ (IEEE 802.3at): Up to 30 watts per port. A 24-port PoE+ switch could consume around 300 to 600 watts when fully loaded.

PoE++ (IEEE 802.3bt): Provides up to 60-100 watts per port. A 12-port PoE++ switch could theoretically consume 720 to 120 watts when fully loaded. If looking for PoE++ products, we have two for your reference, industrial poe switch 8 port(bt) and unmanaged 4 port with 2G(bt)

Total Power Budget:
Each PoE switch has a total power budget that limits the combined power output across all PoE ports. For example, a switch with a total budget of 370 watts can distribute that power to connected devices based on their requirements.

Example Calculation
For a 24-port PoE+ switch with a **370-watt** budget:
If all ports are fully utilized at 30 watts each, you could support a maximum of 12 devices.
If devices are using less power (e.g., 20 watts), you can connect more devices within the 370-watt limit.


Conclusion
To find the exact power consumption for a specific PoE switch, it's best to consult the manufacturer's specifications, which typically list both idle and maximum power consumption figures.

Website: www.fiberok.com
Email: sales@fiberok.com
Welcome to contact for more details or any networking solutions~~

Skip the Carousel

1 2 3

10 months ago | [YT] | 1

Gxcom Poe Switch

Gxcom would like to introduce our new product: 28-port 10 Gigabit uplink 24-port Gigabit managed Ethernet / PoE switch to our global customers. (Both PoE or Non-PoE models are available )



This 10G switch supports 24 * 10/100/1000 RJ45 adaptive electrical ports, 4 * 10 Gb SFP+ ports, 1 console port , L3 managed. It applys perfect security control strategy and CPU protect policy improve fault tolerance and ensure stable operation of the network and load balancing of the interconnection.


The device supports automatic DoS attack defense and SNMP, IEEE 802.1, STP, RSTP, Link aggregation, and other functions. With advanced security functions and quality of service (QoS), it can be used as core layer, distribution layer ,and access layer switch with high density port and easy management, is an ideal choice for various business network applications.

Please feel free to contact for the details and more products!
Website:www.fiberok.com
Email: sales@fiberok.com

Skip the Carousel

1 2

10 months ago (edited) | [YT] | 0

Gxcom Poe Switch

How many poe switches can be daisy chained(Casade)?


Daisy chaining PoE switches involves connecting multiple PoE switches together in a linear fashion to expand the reach of the network and power devices located at greater distances. This can be achieved by connecting the Ethernet ports of one switch to the Ethernet ports of another switch using Ethernet cables.


The number of PoE switches that can be daisy-chained together will depend on the specific models and their capabilities. In general, it's possible to daisy chain multiple PoE switches, but there are limitations to consider.

When daisy chaining PoE switches, it's important to take into account the power budget of each switch and the total power required by the connected devices. Each switch has a maximum power output per port, and when daisy chaining, the total power budget needs to be considered to ensure that all connected devices receive sufficient power.

Additionally, network performance can be impacted by daisy chaining switches due to increased latency and potential bottlenecks. Therefore, it's important to plan the network architecture carefully when considering daisy chaining PoE switches.

Before attempting to daisy chain PoE switches, it's recommended to consult with the manufacturers' specifications for each switch model and consider consulting a networking professional for guidance on proper implementation based on your specific needs. Implementing a successful daisy chain for PoE switches requires careful planning while considering various factors including power requirements, data transmission capabilities, and network performance.

11 months ago | [YT] | 0