SHENZHEN HS TECHNOLOGY CO.,LTD

1500W Portable Mini Laser Welding Machine

3 years ago | [YT] | 2

SHENZHEN HS TECHNOLOGY CO.,LTD

This is 1000W fiber laser welding machine with wobble head welded 2mm stainless steel.
The wire used 1.0mm stainless steel. Wire feeder can suppor 0.8mm 1.0mm 1.2mm 1.6mm diameter.

1.The process that the conventional head can not complete, the dithering
head only needs to use about 70% of the power, so that the cost of the
laser can be saved;
2 Wobble welding back and forth through the galvanometer motor, so that
the bubbles with large impurities  can reduce bubbles, frying, splashing, etc.
3 In the case of irregular gaps, the requirements for the fixture can
be reduced.The conventional oscillating head welding gap is generally
0.2 mm, and light exceeding this width directly passes through. The
width of the gap that can be welded by the oscillating head can reach 0.5mm, but the conventional welding head can only be welded to 0.2mm.
There is no galvanometer motor in the welding head, so there is no swing.
The welding effect is not good, the welding process is limited.

5 years ago | [YT] | 1